Menu
Cart 0

Instructions

Mirror Mount Installation Instructions

Posted by John Keezer on

Our Mirror Mount device bracket can be installed at home in about five minutes, and is compatible with most vehicles. Here's a link to a YouTube Installation video: https://www.youtube.com/watch?v=0icMeRN0kcA 1. Install your device bracket onto the lower "7-hole" portion of the mount using the 2 supplied short screws and allen key tool. Different device brackets are supplied for different devices, so your bracket may vary from the one in the video. 2. Remove one of the two screws from the clamp portion of the Mirror Mount, and loosen the other one. 3. Slide the clamp over your mirror's base, this...

Read more →

Mirror Wire Installation Instructions

Posted by John Keezer on

Our MirrorWire™ is constructed using the Highest Quality Copper Wiring, with AMP style contact prongs for insertion into your powered mirror’s socket connector.An inline micro fuse provides added security for your device. Add one of our MirrorMount™ brackets, for the ultimate OEM-style installation!Connect the RED WIRE to a switched +12VDC contact on your mirror’s harness, and the BLACK WIRE to a ground contact. If you are unsure, use a test light, or consult your dealership. Professional Installation is suggested.To finish off the installation, Zip tie the MirrorWire™ cable to your mirror’s base, and power on your device!

Read more →

Direct Wire Installation Instructions

Posted by John Keezer on

Our DirectWire™ is constructed using the Highest Quality Copper Wiring, with AMP style Spade and Ring Connectors for easy installation into your vehicle.Connect the RED WIRE to a switched +12VDC power source, using a fuse tap or quick splice.Connect the black wire to a clean metal surface, or existing ground contact. Plug the cable into your radar detector and verify the power connections are working.Disconnect the radar detector, and route the wire away from any pedals. We suggest removing the a-pillar, and visor, to tuck the wire underneath the headliner.

Read more →