Instructions — direct wire
Direct Wire Installation Instructions
Posted by John Keezer on
Our DirectWire™ is constructed using the Highest Quality Copper Wiring, with AMP style Spade and Ring Connectors for easy installation into your vehicle.Connect the RED WIRE to a switched +12VDC power source, using a fuse tap or quick splice.Connect the black wire to a clean metal surface, or existing ground contact. Plug the cable into your radar detector and verify the power connections are working.Disconnect the radar detector, and route the wire away from any pedals. We suggest removing the a-pillar, and visor, to tuck the wire underneath the headliner.